Anhui Tiankang Group supplied a multi-category cable package for the Nigeria EDO3 Cement Production Line Project, executed by CBMI (China National Building Material International Engineering Co., Ltd.). The supply included low-voltage power cables, variable frequency drive cables, control cables, signal cables, and communication cables. The supplied products passed final acceptance, and CBMI subsequently issued an official acceptance certificate recognizing their quality, delivery performance, and technical service.
| Item | Details |
|---|---|
| Project | Nigeria EDO3 Cement Production Line Project |
| Project Type | Cement Production Line / EPC |
| Country | Nigeria |
| Project Location | Edo State, Nigeria |
| EPC Contractor / Buyer | CBMI — China National Building Material International Engineering Co., Ltd. |
| Supplier | Anhui Tiankang Group |
| Application | Power Distribution, Motor Drives, Control Systems, Signal Transmission, and Communication |
| Industry | Cement / Building Materials |
| Scope of Supply | Low-Voltage Power Cables, VFD Cables, Control Cables, Signal Cables, and Communication Cables |
| Contract Value | RMB 8,300,000 (approximately USD 1.2 million) |
| Contract Date | April 8, 2022 |
| Final Acceptance Date | August 20, 2023 |
| Acceptance Certificate Date | March 15, 2024 |
| Project Status | Completed |
| Acceptance Documentation | Official Acceptance Certificate |
The Nigeria EDO3 Cement Production Line Project is an industrial development in Edo State, Nigeria, involving cement production facilities and associated material-handling equipment.
CBMI, an international EPC contractor specializing in cement and building materials projects, required a range of cables for electrical distribution, motor drive systems, plant control, instrumentation signals, and communication networks.
Anhui Tiankang Group supplied the second batch of cables for the project. The approximately RMB 8.3 million supply package covered multiple cable categories and construction types to meet the project's specified electrical and control requirements.
The supplied products subsequently passed final acceptance. On March 15, 2024, CBMI issued an official acceptance certificate documenting its assessment of the supplied cables and Tiankang's technical service.
Cement production lines use different cable types for power distribution, motor drives, control circuits, instrumentation signals, and communication systems. Coordinating these categories requires close attention to cable specifications, conductor sizes, shielding, armoring, and project documentation.
Cement plants can expose electrical installations to dust, vibration, and elevated temperatures. Appropriate cable construction and installation practices are important when selecting cables for motor circuits, control systems, and other industrial applications.
Variable frequency drive systems can introduce electrical noise into surrounding circuits. The project included specified VFD cables and shielded signal cables to address the requirements of motor drive and instrumentation applications.
The project specified packaging limits, including maximum package dimensions of 12 m × 2.6 m × 2.8 m and a maximum weight of 26 tonnes per package. A volume-to-weight ratio requirement was also stated in the shipping instructions.
Compliance with these requirements called for coordinated packing arrangements, package measurements, weight control, and shipping documentation for delivery to the designated Chinese ports.
The EPC contractor required the supplied cable models, conductor sizes, armoring, shielding, and other construction details to conform to the applicable project specifications. Factory inspection records and technical documents supported the inspection and acceptance process.
Anhui Tiankang Group supplied the following cable categories for the Nigeria EDO3 project.
YJV series, including specified configurations from 1×240 mm² to 5×2.5 mm².
YJV22 armored versions where specified.
Rated voltage and detailed construction according to the applicable cable schedule.
BPYJV2 series.
Specified configurations ranging from 3×35+1×16 mm² to 4×16 mm².
Cable construction selected according to the project requirements for variable frequency drive applications.
DJYPV2V2 series.
Specified configurations from 2×2×1.0 mm² to 8×2×1.0 mm².
Double-shielded construction as specified for the relevant circuits.
KYJV2 series — unshielded configurations.
KYJVP2 series — shielded configurations.
Specified configurations from 3×1.0 mm² to 24×1.0 mm².
Project documentation included applicable factory inspection and test reports, technical datasheets, material certificates, and export documentation.
Note: Detailed quantities and individual cable lengths should be added to the published scope if the original contract schedule is available.
YJV and YJV22 power cables were included in the supply package in the specified conductor sizes and construction types. Cable selection for individual circuits depends on the project's electrical design, installation conditions, and load requirements.
BPYJV2 series cables were supplied for specified variable frequency drive applications. The selected cable construction was based on the project's requirements for motor drive connections and electrical noise management.
Correct cable selection, routing, termination, and grounding practices remain important for the performance of VFD installations.
The package included shielded and unshielded control cables, together with double-shielded computer cables. These configurations support different control and signal transmission requirements throughout an industrial production facility.
The effectiveness of shielding depends on the complete installation design, including cable routing and appropriate shield termination.
Packaging arrangements were coordinated against the project's stated dimensional and weight limits. Shipment documentation and packing information supported logistics planning and delivery to the designated Chinese ports.
The supplied cables underwent the applicable factory inspection and testing process. According to the project records provided, final acceptance was completed on August 20, 2023, followed by the issuance of an official acceptance certificate by CBMI on March 15, 2024.
The project records document successful final acceptance of the supplied cables and the subsequent issuance of an official acceptance certificate.
Key milestones
April 8, 2022: Contract date.
August 20, 2023: Final acceptance completed, according to the acceptance record.
March 15, 2024: CBMI issued the official acceptance certificate.
The certificate's feedback covered the supplied power, control, signal, and communication cables, as well as product quality, operational performance reported at the time of acceptance, technical service, and delivery coordination.
Excerpt from the acceptance certificate
“All products supplied by your company have demonstrated reliable performance, stable quality, and smooth operation.”
The certificate also acknowledged Tiankang's technical service and the timely arrival of the supplied products at the construction site.
The quotation above is an excerpt from the customer feedback provided for this case study. The complete certificate should be retained as supporting evidence for publication.
Multi-Category Cable Manufacturing — power, VFD, control, signal, and communication cables for industrial projects.
EPC Project Supply Experience — experience supporting international industrial and building materials projects.
Flexible Cable Configurations — different conductor sizes, core configurations, armoring, and shielding options according to project specifications.
Project-Specific Packaging Coordination — packing arrangements based on buyer-defined dimensional, weight, and shipping requirements.
Technical Documentation Support — applicable datasheets, factory test reports, material certificates, and project records.
Quality Management — manufacturing under an ISO 9001 quality management system.
Documented Customer Acceptance — official acceptance documentation for the Nigeria EDO3 cable supply package.
Typical cable requirements include low-voltage power cables for electrical distribution, VFD cables for motor drive systems, control cables for operating equipment, shielded signal cables for instrumentation, and communication cables for data transmission. The actual selection depends on the plant design and cable schedule.
Yes. Tiankang's product range covers power, control, instrumentation, signal, and communication cables. Multiple categories can be coordinated within a project supply package according to the approved specifications and agreed scope.
Packaging can be arranged according to agreed project requirements, including specified package dimensions, maximum weight, labeling, and packing documentation. The final arrangement should be confirmed against the shipping instructions and transport method.
Depending on the contract and product requirements, documentation may include technical datasheets, factory inspection and test reports, material certificates, packing lists, and other agreed project records.
The applicable standards depend on the cable type, design, and project specification. Requirements should be confirmed for each cable category during technical review rather than assuming that a single standard applies to the entire package.
Anhui Tiankang Group manufactures and supplies power cables, VFD cables, control cables, instrumentation and signal cables, and communication cables for industrial facilities and EPC projects.
Share your cable schedule, technical specifications, and delivery requirements with our team for a project-specific supply proposal.
Contact Our Engineering Team
Yin Shuangjie
International Sales Manager
Email: [email protected]
WhatsApp / Zalo: +86 17856068126
Website: https://www.tiankang-global.com/
Founded in 1974, Anhui Tiankang Group is a cross-industry and diversified conglomerate. Its core products cover instruments and meters, optical and e...
Copyright © 2026 ANHUI TIANKANG（GROUP） SHARES CO.,LTD XML