Anhui Tiankang Group supplied a control and instrumentation cable package for the Cyprus Makri 260MW Combined Cycle Power Plant EPC project, including shielded control cables, computer cables, thermocouple compensation cables, fiber optic cables, and communication cables. The package supported the plant's control, instrumentation, and communication requirements.
| Item | Details |
|---|---|
| Project | Cyprus Makri 260MW Combined Cycle Power Plant |
| Project Type | Combined Cycle Power Plant (EPC) |
| Country | Cyprus |
| Project Location | Makri, Cyprus |
| EPC Contractor | Harbin Electric International Company Limited (HEI) |
| Application | Control Systems, Instrumentation Signal Transmission, DCS/PLC Interfaces |
| Industry | Power Generation / Thermal Power |
| Scope of Supply | Control Cables, Computer Cables, Thermocouple Compensation Cables, Fiber Optic Cables, Communication Cables, and Specified Power Cables |
| Supply Value | RMB 3,560,000 (approximately USD 490,000) |
| Contract Date | January 2024 |
| Project Status | Completed |
| Documentation | Technical Datasheets, Factory Test Reports, Material Certificates, and EPC Documentation |
The Cyprus Makri 260MW Combined Cycle Power Plant is a power generation project located in Cyprus. Its control and instrumentation systems require various cable types to connect field instruments, control equipment, and plant communication networks.
For this project, Harbin Electric International Company Limited (HEI) engaged Anhui Tiankang Group to supply a range of control and instrumentation cables. The supply scope covered shielded and unshielded control cables, single- and double-shielded computer cables, thermocouple compensation cables, fiber optic cables, communication cables, and specified power cables.
With a contract value of approximately RMB 3.56 million, the package required coordination across multiple cable categories, technical specifications, and project documentation requirements.
The project required cables for different applications, including general control, instrumentation signal transmission, temperature measurement, data communication, and specified power distribution circuits. Each cable category required its own construction and electrical characteristics.
Control and computer cables used in power plant environments may be exposed to electromagnetic interference from nearby electrical equipment. Shielded and double-shielded cable configurations were specified for applications requiring additional protection against interference.
The package included K-type and E-type thermocouple compensation cables. Correct conductor materials and cable identification are important for maintaining the intended thermoelectric characteristics and measurement accuracy of the associated temperature measurement circuits.
Certain control and computer cables were specified with corrosion-resistant construction. The package also included WDZN-YJYP2 power cables specified for low-smoke, halogen-free performance, subject to the applicable product specifications.
The multi-category cable package required technical datasheets, factory inspection and test reports, material certificates, and other project documentation. Manufacturing, inspection, packaging, and export arrangements also needed to be coordinated with the EPC project's delivery requirements.
Anhui Tiankang Group supplied the following cable types for the Cyprus Makri project.
WDZN-YJYP2-0.6/1.0kV, 1×185 to 3×35 mm² — various lengths
DDZRC-KYJV-0.45/0.75kV, 2×1.5 to 4×4 mm² — various lengths
DDZRC-KYJVP-0.45/0.75kV, 2×1.5 to 24×1.5 mm² — various lengths
Specified corrosion-resistant versions: 8×1.5, 12×1.5, and 24×1.5 mm²
DDZRC-DJYJVP-0.45/0.75kV, 1×2×1.0 and 1×3×1.0 mm² — various lengths
DDZRC-DJYJPVP-0.45/0.75kV, 2×2×1.0 to 10×3×1.0 mm² — various lengths
Specified corrosion-resistant versions: 1×2×1.0, 2×2×1.0, and 5×2×1.0 mm²
DDZRC-KX-YJVP-0.45/0.75kV, 1×2×1.5 mm² — K-type, single shielded
DDZRC-KX-YJPVP-0.45/0.75kV, 2×2×1.5 to 10×2×1.5 mm² — K-type, double shielded
DDZRC-EX-YJPVP-0.45/0.75kV, 8×2×1.5 mm² — E-type, double shielded
Single-mode, 4-core fiber optic cable — 5 km
Multimode, 4-core fiber optic cable — 4 km
UTP CAT 6 cable — 0.2 km
RS485 communication cable, 1×3×0.75 mm² — 0.2 km
RS485 shielded twisted-pair cable, 24 AWG — 0.3 km
Project documentation included technical datasheets, factory inspection and test reports, material certificates, and applicable EPC documentation.
Both shielded and unshielded control cables were included to meet different circuit requirements. Shielded KYJVP cables were specified for applications requiring additional electromagnetic interference protection, while unshielded KYJV cables were included for other control circuits.
The package included DDZRC-DJYJVP single-shielded and DDZRC-DJYJPVP double-shielded computer cables. The specified shielding configurations provide options for different interference-control requirements. Actual performance depends on cable installation, routing, and grounding practices in accordance with the project design.
KX and EX compensation cables were supplied for the specified K-type and E-type thermocouple circuits. Selecting the appropriate compensation cable type helps maintain compatibility with the corresponding thermocouple measurement system.
Selected control and computer cables were supplied in the specified corrosion-resistant constructions for applications requiring additional resistance to the relevant environmental conditions. The suitability of each construction depends on its defined materials and project requirements.
The supply included WDZN-YJYP2 power cables, single-mode and multimode fiber optic cables, CAT 6 cable, and RS485 communication cables. These products addressed different power, network, and serial communication requirements within the project scope.
Technical documentation and factory inspection records were prepared to support the EPC project's review and handover requirements. Cable packaging and export arrangements were coordinated for shipment from China to Cyprus.
Broad Cable Manufacturing Capability — control cables, computer cables, thermocouple compensation cables, fiber optic cables, communication cables, and specified power cables.
Experience Supporting International EPC Projects — experience supplying cable packages for power generation and industrial projects.
Multiple Shielding Configurations — single-shielded, double-shielded, and unshielded options for different circuit requirements.
Special Cable Options — thermocouple compensation cables and specified corrosion-resistant and low-smoke, halogen-free cable constructions.
Technical Documentation Support — datasheets, factory test reports, material certificates, and project documentation, as required by the agreed scope.
Export Supply Coordination — packaging and shipment coordination for international project deliveries.
Quality Management — manufacturing under an ISO 9001 quality management system.
Typical requirements include control cables, instrumentation and computer cables, thermocouple compensation cables, fiber optic cables, communication cables, and power cables. The actual selection depends on the plant design and cable schedule.
Yes. Tiankang's cable range includes shielded control and computer cables in different configurations. The required construction should be confirmed against the project datasheet and cable schedule.
Yes. Tiankang can supply K-type, E-type, and other specified thermocouple compensation cables, subject to the required conductor type, construction, shielding, and applicable specifications.
Tiankang can provide agreed technical datasheets, factory inspection and test reports, material certificates, and other applicable documentation according to the project requirements and supply scope.
Applicable standards depend on the cable type, design, and project specification. The relevant standards and technical requirements should be confirmed for each cable category during technical review.
Anhui Tiankang Group manufactures and supplies control, instrumentation, computer, thermocouple compensation, communication, fiber optic, and power cables for power generation and industrial applications.
We can review your cable schedule, technical specifications, and project requirements to prepare a cable supply proposal tailored to your EPC project.
Contact Our Engineering Team
Yin Shuangjie
International Sales Manager
Email: [email protected]
WhatsApp / Zalo: +86 17856068126
Website: https://www.tiankang-global.com/
Founded in 1974, Anhui Tiankang Group is a cross-industry and diversified conglomerate. Its core products cover instruments and meters, optical and e...
Copyright © 2026 ANHUI TIANKANG（GROUP） SHARES CO.,LTD XML